Installation Guide
Tools Needed:
- Adjustable wrench set
- Phillips screwdriver
- Flathead screwdriver
- Drill with masonry bits
- Level
- Measuring tape
- Coaxial cable stripper
- Weatherproof sealant
Step-by-Step Installation
- Site Selection: Choose an elevated location with clear line of sight to transmission towers, away from obstructions and interference sources.
- Mounting Preparation: Select appropriate mounting hardware based on installation surface (roof, wall, or mast).
- Assemble Antenna Elements: Connect all antenna elements according to the assembly diagram, ensuring proper orientation and spacing.
- Mount Antenna: Secure the antenna to the mounting bracket using provided hardware, ensuring all connections are tight.
- Cable Connection: Connect high-quality coaxial cable to the antenna feed point using weatherproof connectors.
- Grounding: Install proper grounding system to protect against lightning strikes and electrical surges.
- Alignment: Point antenna toward desired signal source using compass and signal strength meter for optimal reception.
- Final Check: Secure all cables, apply weatherproofing, and verify all connections are tight and protected.
Specifications
| Model Series | FSA-5800HD |
| Type | Yagi-Uda Directional Antenna |
| Frequency Range | 470-862 MHz (UHF) |
| Gain | 18 dBi |
| Front-to-Back Ratio | 25 dB |
| VSWR | ≤ 1.5:1 |
| Impedance | 75 Ω |
| Polarization | Horizontal/Vertical (adjustable) |
| Elements | 22 elements (16 directors, 1 reflector, 5 driven) |
| Boom Length | 3.2 meters |
| Wind Rating | 150 km/h |
| Weight | 8.5 kg |
| Connector Type | F-Type Female |
| Mounting | 2-inch mast clamp included |
Warranty Information
- Full Warranty: 5 years on materials and workmanship
- Corrosion Warranty: 10 years on aluminum elements
- Performance Guarantee: Meets or exceeds all published specifications
For warranty service, contact Five Star Technical Support at 1-800-555-ANTENNA or visit FiveStarAntenna.com
Key Features
High Gain Design
Optimized Yagi-Uda design provides exceptional signal gain for long-distance reception, ensuring clear reception even in fringe areas.
Corrosion-Resistant Construction
All aluminum elements feature heavy-duty anodized finish for maximum corrosion resistance and long-term durability in harsh weather conditions.
Precision Tuned Elements
Computer-optimized element spacing and lengths provide maximum signal capture and rejection of unwanted interference.
Adjustable Polarization
Rotatable mounting bracket allows easy switching between horizontal and vertical polarization to match broadcast signals.
Low VSWR Design
Carefully engineered matching system ensures minimal signal loss and maximum power transfer to your receiver.
Heavy-Duty Mounting System
Industrial-grade mounting hardware provides secure installation capable of withstanding extreme weather conditions.
Frequency Coverage Details
Band IV
470-582 MHz: Primary digital television channels with optimized reception
Band V
582-862 MHz: Extended UHF coverage for additional channels
4G/LTE Filtered
Built-in filtering reduces interference from cellular signals
FM Radio Reception
Extended frequency response for FM radio reception (88-108 MHz)
Digital Ready
Optimized for ATSC, DVB-T, and DVB-T2 digital television standards
Future Proof
Designed to accommodate upcoming broadcast standards and frequencies
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Weak or no signal | Incorrect alignment, cable issues, obstructions | Re-align antenna, check cable connections, remove obstructions |
| Pixelation or dropouts | Signal interference, multipath issues, weak signal | Adjust antenna position, check for nearby interference sources |
| Only some channels received | Frequency-specific issues, antenna damage | Check element alignment, inspect for physical damage |
| Signal varies with weather | Atmospheric conditions, loose connections | Secure all connections, consider weatherproofing improvements |
| Antenna movement in wind | Loose mounting hardware, inadequate support | Tighten all mounting hardware, reinforce support structure |
| Corrosion on elements | Environmental exposure, salt air | Clean with mild detergent, apply protective coating if needed |
Common Installation Issues
- Poor Grounding: Ensure proper grounding to prevent lightning damage - Use 10-gauge copper wire to ground rod
- Cable Quality: Use high-quality RG6 quad-shield coaxial cable for best performance
- Height Considerations: Higher installation typically provides better reception but requires more secure mounting
- Direction Finding: Use online tower locators or smartphone apps to find correct antenna direction
- Signal Splitting: Each split reduces signal strength - Use amplified splitters for multiple TV connections
- Tree Interference: Foliage can block signals - Install above tree line when possible
Manual Downloads
Current Model Manuals
FSA-5800HD
High Definition Directional Antenna
FSA-4800PRO
Professional Grade Antenna
FSA-3600LT
Long-Range Terrestrial Antenna
FSA-2200COMPACT
Compact Directional Antenna
Popular Previous Models
FSA-5000LEGACY
Legacy High Gain Antenna
FSA-4200DIGITAL
Digital Ready Antenna
FSA-3800XT
Extended Range Antenna
FSA-3000PRO
Professional Installation Antenna
Accessory Manuals
FSA-MOUNT-ULTRA
Heavy Duty Mounting System
FSA-AMP-2000
Low Noise Amplifier
FSA-GROUND-KIT
Lightning Protection System
FSA-TOOL-KIT
Professional Installation Tools