Installation Guide
Tools Needed:
- Flathead screwdriver
- Phillips screwdriver
- Wire strippers
- Voltage tester
- Level
- Drill (if needed for mounting)
Step-by-Step Installation
- Power Off: Turn off power to the HVAC system at the circuit breaker to ensure safety during installation.
- Remove Old Thermostat: Carefully remove the cover of your existing thermostat and disconnect the wires, labeling each wire according to its terminal.
- Mount New Base Plate: Secure the Lux thermostat base plate to the wall using provided screws, ensuring it is level.
- Connect Wires: Connect the labeled wires to the corresponding terminals on the Lux thermostat base plate (R, W, Y, G, C, etc.).
- Attach Thermostat: Align the Lux thermostat unit with the base plate and snap it into place securely.
- Restore Power: Turn the power back on at the circuit breaker.
- Initial Setup: Follow the on-screen prompts to set up time, date, temperature preferences, and system configuration.
- Test Operation: Test heating, cooling, and fan functions to ensure proper installation and operation.
Specifications
| Model Series | TX9600TS |
| Type | Programmable Smart Thermostat |
| Color | White / Silver |
| Display | Backlit LCD Touchscreen |
| Temperature Range | 40°F - 99°F (4°C - 37°C) |
| Temperature Accuracy | ±1°F (±0.5°C) |
| Compatibility | Single-stage and multi-stage HVAC systems |
| Power Requirements | 24V AC, 0.2A (C-wire required or battery option) |
| Battery Backup | 2 AA alkaline batteries (optional) |
| Dimensions (HxWxD) | 5.1 x 3.3 x 1.0 inches (130 x 84 x 25 mm) |
| Weight | 8.8 oz (250 g) |
| Wi-Fi Connectivity | 802.11 b/g/n (2.4 GHz only) |
Warranty Information
- Full Warranty: 3 years parts and labor
- Extended Coverage: Optional 5-year extended warranty available
- Technical Support: Free lifetime phone and online support
For warranty service, contact Lux Products Customer Service at 1-800-526-6636 or visit LuxProducts.com
Key Features
7-Day Programmable
Set different temperature schedules for each day of the week to match your lifestyle and maximize energy savings without sacrificing comfort.
Smart Response Technology
Learns your heating and cooling system's performance to reach programmed temperatures at exactly the right time, eliminating temperature swings.
Wi-Fi Connectivity
Control your thermostat remotely via smartphone app from anywhere, receive alerts, and monitor energy usage in real-time.
Adaptive Recovery
Intelligently determines when to start heating or cooling to reach your desired temperature by your scheduled time, considering outside weather conditions.
Geofencing
Uses your smartphone's location to automatically adjust temperatures when you leave and return home, providing optimal comfort and efficiency.
Energy Usage Reports
Provides detailed energy consumption reports and savings tips through the mobile app to help you reduce your utility bills.
Programming Modes Explained
Home Mode
Standard comfort settings for when you are at home and active
Away Mode
Energy-saving settings that activate automatically when you leave
Sleep Mode
Optimized temperatures for sleeping comfort and energy savings
Vacation Mode
Extended away settings for energy savings during long trips
Manual Override
Temporary temperature adjustments without affecting your schedule
Hold Mode
Maintains current temperature until you manually change it
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blank display | Power loss, dead batteries, tripped breaker | Check circuit breaker, replace batteries, ensure C-wire connection |
| HVAC system not responding | Incorrect wiring, system mode conflict, blown fuse | Verify wiring connections, check system switch position, inspect HVAC fuse |
| Inaccurate temperature reading | Location issues, heat sources nearby, calibration needed | Relocate thermostat away from heat sources, recalibrate temperature sensor |
| Wi-Fi connection issues | Weak signal, incorrect password, router compatibility | Move router closer, re-enter Wi-Fi credentials, check 2.4GHz network |
| Short cycling | Incorrect settings, dirty filter, system issues | Adjust cycle rate settings, replace air filter, check HVAC system |
| App not connecting | Internet issues, account problems, firmware outdated | Check internet connection, verify login credentials, update firmware |
Error Codes
- E1: Temperature sensor failure - Contact technical support
- E2: Communication error - Check wiring connections
- E3: Power issue - Check C-wire connection or replace batteries
- E4: System lockout - Wait 5 minutes and restart
- E5: Configuration error - Reset to factory settings
- E6: Wi-Fi connection failed - Check network settings
Manual Downloads
Current Model Manuals
TX9600TS
Smart Wi-Fi Thermostat
TX9600TSW
White Wi-Fi Thermostat
TX9600TSS
Silver Wi-Fi Thermostat
TX9600TSB
Black Wi-Fi Thermostat
Popular Previous Models
TX1500E
Basic Programmable Thermostat
TX500U
Universal Programmable Thermostat
TX9100U
5+2 Day Programmable Thermostat
TX9600TS-1
First Gen Wi-Fi Thermostat